Update i780 WinMob 6.1 HL2 Official

Check ur firmware (START-SETTINGS-SYSTEM-VERSION)
is it HD1?
Newest is HL2, with WinMob 6.1

















For XP ONLY:
Caution:

• Upgrading will erase all the stored data on the device. It is recommended to backup necessary data before starting the upgrade.
• Make sure nothing disrupts the upgrade process.
  (You must not turn off your PC or the device, remove the USB cable or close PC applications during upgrade.)
• Device must have enough battery to sustain until the upgrade is complete.

How to Install:
-Download upgradeForXP
1.Install ActiveSync4.5 DOWNLOAD
2.Install Samsung Modem Driver Download

3.Samsung Mobile Modem Driver should appear under ‘Add or Remove Programs’ menu under ‘Control Panel’.













4.Connect to ActiveSync and backup necessary data
Connect your device to the PC with the USB data cable.
(It is strongly recommended to connect directly to the PC USB port rather than a USB hub.)

If connection fails, please try again after closing all PC firewalls or Anti-Virus programs. Please keep ActiveSync active after completing data backup. ActiveSync must remain active throughout the entire process.





5.Upgrade
Caution
- During the upgrade, all the data stored on the device will be lost. Please check that all necessary data had been backed up.
- The upgrade process must not be interrupted. Closing all
unnecessary programs running on the PC is recommended.
- Download the desired program version.
- Execute the downloaded program.

- Select language
- A dialog box, as shown on the left, will be displayed.




Complete and tick off critical tasks listed.

A dialog box as shown above will be displayed when the device is identified. Clicking the OK button will reset the device, and the update installation will start automatically. items, click on ‘Verify device’.






Download is in progress. Please wait until the download is complete.









If you see this message, please check if SAMSUNG driver is properly installed under Control Panel. If so, please try upgrade again.








Download is complete and the device will be reset. You may remove the USB cable and close the application.